Focus FS100 User Manual page 27

Fast Forward and Reverse
Pressing the Forward Search button multiple times results in increases in
the search speed, i.e. fast forward. This mode works both in forward and
reverse functions. For instance, if you are in 10X FF speed and you press the
Back Search button once, the FS­100 is now in 2X FF mode. In addition, this
applies to backward search speeds. The default speed resolution is as
follows (NTSC and PAL, have slightly different multiples for < 1X):
• Reverse: ­30X, ­10X, ­2X, ­1X (reverse play), ­1/2X(­15fps), Still.
• Forward: Still, +1/2X (+15fps), +1X (play), +2X, +10X, +30X
Fast Forward and Reverse Search Compatible Camcorders
In Forward and Reverse Search modes, some camcorders do not display
video when played­back from an external device, such as the FS­100.
Back Index
|
This button returns the FS­100 to the beginning of the current clip when
in playback mode. Press this button twice in sequence to return the FS­
100 to the previous clip during playback. In
button to return the FS­100 to the beginning of the previous clip.
Using Back Index with Short Clips
When using Back Index with short clips, it is first necessary to place the
FS­100 in STOP mode.
Pause, STOP and Power OFF
While in the Home screen, and in any transport mode, press this button
to Pause the FS­100. Press it again to stop the FS­100. Refer to the
section, Setup Screens on page 48 for more information.
To power off the FS­100, hold down the
seconds. During Power OFF and if the Alarm function is
FS­100, makes an audible beep indicating it is turning off.
Forward Index
Use this button to skip forward to the next clip in
modes.
FS­100 Portable DTE Recorder
STOP
STOP
|
Quickstart
mode, press this
button for three
ON , the
and
STOP PLAY
9