Set The Time And Date - Focus FS-4/ User Manual

Fs-4/fs-4pro portable dte recorder

Hide thumbs Also See for FS-4/:

Table of Contents

Step 2:

Wait for the following Welcome screen to appear.

This Welcome screen appears as the unit initializes. You are ready to

proceed when the Home screen (shown below) appears.

Set the Time and Date

After you have powered on the FS-4, set the time and date as follows:

Step 1:

Press the Right navigation key several times until the

Setup Screen appears on the screen as shown below:

Step 2:

Use the Down navigation key to highlight the date and

press the Right navigation key to highlight the date. The

highlighted item is the one currently selected. The

following screen appears:

Table of Contents

Fs-4pro