Manual Recording
Step 1:
Set the video camera to
Step 2:
Verify that an image appears in the viewfinder.
Step 3:
On the FS100, press Record once.
This sets the FS100 to
Record
Step 4:
On the FS100, press Record button a second time. The
FS100 begins to record. The timecode value is displayed
on the screen.
Step 5:
Press
RecordPause
Step 6:
Press
the same clip.
Step 7:
Press
Step 8:
Press
Creating a New File without Dropping Frames
When in record mode, it is possible to break the recording into a
separate, new file without dropping frames.
Press
and the FS100 automatically creates a new clip.
Record
FS100 Portable DTE Recorder
Camera
RecordPause
Stop
(OFF)
(OFF) once to return the FS100 to
Stop
mode.
Record
and the FS100 begins to record again on
(OFF) twice to stop the recording.
Stop
twice to begin recording a new clip.
Record
Quickstart
or
mode.
Cam
mode.
29