Upgrade Errors - Focus FS100 User Manual

Step 9: Up on successful completion of the upgrade, the FS­100 displays
the message:
PLEASE RESTART
Step 10: Hold down the
shuts down.
Step 11: Power up the FS­100.
Upgrade Errors
If the upgrade fails, the FS­100 displays one of the following messages:
WRONG PRODUCT
Verify that the update is for the model of FS­100 it is being installed on.
An update is not cross­platform and must be installed on the model for
which it is intended.
To find the specific model of a FS­100 go to the
and then version (
FS­100 Portable DTE Recorder
UPGRADE
COMPLETE
STOP / POWER OFF
UPGRADE ERROR
ID
EXIT
), refer to Setup Screens on page 48.
V 1.0.0
FS­100 Functions
button until the FS­100
screen
SETUP
71