Log Files
With each recording of a particular clip on a disk, the FS100 creates
a text log file to identify information about the recorded clip and the
recording session. Information includes:
•
Clip name
•
Clip in/out source TC values
•
Clip duration
•
Clip type (record file type).
The log file also identifies when the shock cache becomes low and
when disk or other errors occur during a recording.
Error Messages
Error messages may appear on the FS100 LCD display from time to
time. The purpose of these messages is to alert you to action that may
effect your FS100 operation. Below is a list of error messages and
actions you can take:
Error Message
Description
LOW BATTERY!
Battery power is low.
HIGH
The unit is getting too hot
TEMPERATURE!
for normal operation.
NO SPACE LEFT!
The Disk Drive is Full.
DISK ERROR
Lost Disk Communication.
XXX
NO DISK
Lost Disk Communication.
DETECTED
WRONG
Incorrect Software Loaded.
PRODUCT ID
FILE NOT FOUND
Wrong filename or missing
file.
98
Action
Connect AC Power or replace the bat
tery pack.
Make sure the vent and fan intake
holes are clear.
Transfer files off the drive and format it
before attempting to do more record
ing.
Contact Focus Enhancements Techni
cal Support.
Contact Focus Enhancements Techni
cal Support.
Download correct software and per
form upgrade again.
Check filename or that upgrade file
exists.
FS100 Portable DTE Recorder