Quickstart
Set Time and Date
Date and Time Must Be Set
The date and time must be set because they are used in the FS-100 file
naming function.
1. Press the
Setup display appears on the screen as shown below:
2. Use the
press the
screen.
3. Use the
highlighted value. Use the
to highlight the Month, Day, and Year.
4. When complete, press the right-most Function button
indicated as
indicated on the Setup Screen.
FS-100 Portable DTE Recorder
30
navigation button several times until the
Right
SETUP
09 / 15 / 05
11 : 21 : 13
V 3 . 1. 0
-LCDLIGHT ON
navigation button to highlight the date and
Down
navigation button to access the Set Date
Right
SET DATE
09
/ 15 / 05
MM / DD / YY
and
navigation buttons to change the
Up
Down
on the screen. The new date will be
BACK
BACK
and
navigation buttons
Right
Left