•
Transport
•
Use the
Keeper
For example, if the current Reel selection is 3. pressing
changes the selection to Reel 4.
To purchase the wired remote control, p/n
the FS100, visit Focus Enhancements web site at
www.focusinfo.com/sales/store/.
•
Syncro Slave
Use this mode when the camcorder does not have FS100
compatible external control or the tapeless trigger
functionality. In
FS100 mimics the camcorder's operations by monitoring the
camcorder's tape record state.
•
AV/C
Do Not Use AV/C control in Record Mode
Use AV/C in playback mode and other situations where the
FS100 is controlled by an external FireWire device such as a
NLE system that is not supported by Direct To Edit
Technology. In these cases, the FS100 can be used in a
manner similar to a camcorder to capture footage to the NLE.
•
Tapeless Control
The Tapeless Control mode allows the FS100 to be
controlled from a camcorder, if it features a FS100
compatible Tapeless control setting separate from the tape
transport. It is recommended to use this control mode with
the companion camcorder, the Panasonic AGHVX200.
Camcorder Requirements for Tapeless Control Mode
Tapeless Control mode will not work unless it is supported by the
camcorder and the camcorder is placed in this external control mode.
Please check your camcorder manual for more details.
FS100 Portable DTE Recorder
keys have the same functions as on the FS100.
key to cycle through the available Reels.
control mode, the
Syncro Slave
FS100 Functions
Keeper
, for
ACSS001901
79