Setting Up Master And Slave Fs­100 - Focus FS100 User Manual

Setting Up Master and Slave FS­100
Master FS­100 Slave FS­100
2
STOP 1 ­ 001
COUNTER
00 : 00 : 00 : 00
DISK 1 000min
SYNC DISP LOCK
Step 1: Connect the camcorder to the master FS­100,
using the supplied FireWire cable.
Step 2:
Master
Power on unit.
Go to the
HDD Mode
USE EXT FS­100
Step 3: Connect the FS­100s through the units
using a 6­pin to 6­pin FireWire cable.
Step 4:
Slave
Power on the unit
Go to the
HDD Mode
Step 5:
Master
Begin recording or playback using the master FS­100.
Use DD Drive Mode when Connecting to a PC
It is important to take the master FS­100 out of USE EXT FS­
100 mode before attempting to connect to a computer.
To do this, select DD DRIVE from the HDD Mode screen.
This returns use of the unit to hard disk mode.
FS­100 Portable DTE Recorder
4
1
COMPUTER THEN
ENABLE BYPASS
SUCCESS
EXIT
menu screen and enable
.
Computer I/O
screen and enable
FS­100 Functions
3
CONNECT
DV I/O connector
connectors
.
DD DRIVE
47