Repair Disk
Use this function if a recording session does not complete properly
and there is a question that the file may be damaged. For example,
recording terminates due to a loss of power to the FS100. Repair
Disk scans the entire disk drive checking for and repairing file errors
and incomplete files. When the file is repaired it is can be used in the
NLE system.
Corrupted Files May Need More Repairs
After running Repair Disk some files may still need further work to restore
them. In such a case, run the utility Repair Clip, refer to the following page.
To repair a disk:
Step 1: From the Utilities screen, go to
Step 2: Select
YES
A status screen displays the progress of disk repair and at
completion displays the message:
Complete indicating Repair Disk was successful.
Aborted indicating that there were errors and the repair did not
complete.
Step 3: Press
BACK
Step 4: Move content from FS100.
Step 5: Use Format Disk utility before doing any further recording. This
step optimizes disk storage, see Format Disk on page 66.
FS100 Portable DTE Recorder
REPAIR DISK
PRESS YES TO
REPAIR DISK
YES BACK
Repair Disk
and the FS100 begins repairing the disk.
to return to the
Utility
screen.
FS100 Functions
.
67