Tc Drop, Non­drop Ntsc Only - Focus FS100 User Manual

FS­100 Functions
TC DROP, NON­DROP
These parameters are only available for NTSC and only one may be
enabled at a time. Drop and non­drop enable and disable the drop­
frame function that modifies how the timecode is calculated during
recording.
• TC DROP
Enables the drop­frame function:
• Frames 00 and 01 are dropped from each minute of video
recorded.
• Exception
• TC NON­DROP
Disables drop­frame. No frames are dropped during
recording and the timecode reflects the actual time during
recording.
Use with TC FREE RUN or TC REGEN
TC DROP and TC NON­DROP may only be set when using the TC FREE
RUN or TC REGEN settings.
56
NTSC only
The first minute of each hour is not dropped.
Group Default
FS­100 Portable DTE Recorder