Set Time And Date - Focus FS-4 User Manual

Set Time and Date

Date and Time Must Be Set
The date and time must be set because they are used in the FS-4 file
naming function.
Step 1:
Press the
display appears on the screen as shown below:
Step 2: Use the
the
Right
Step 3:
Use the
highlighted value. Use the
highlight the Month, Day, and Year.
Step 4: When complete, press the right-most Function button indicated
as
BACK
Setup Screen.
navigation button several times until the Setup
Right
SETUP
09 / 15 / 05
11 : 21 : 13
V 1 . 0. 0
-LCDLIGHT OFF
navigation button to highlight the date and press
Down
navigation button to access the Set Date screen.
SET DATE
09 / 15 / 05
MM / DD / YY
and navigation buttons to change the
Up Down
on the screen. The new date will be indicated on the
BACK
and navigation buttons to
Right Left
Quickstart
23