Powering The Fs­100; Connecting The Fs­100 To Ac Power - Focus FS100 User Manual

Quickstart
Powering the FS­100
• The FS­100 operation without a battery installed.
To operate the FS­100 without a battery installed, connect the
unit to an AC power source.
• Before operating the FS­100 with battery power.
It is first necessary to fully charge the battery. An uncharged
battery, typically takes 2­3 hours to charge.
Connecting the FS­100 to AC Power
Attach the AC power cord to the FS­100 (with or without battery
installed). The FS­100 is immediately ready for operation.
To do this, connect the AC power as follows:
Battery Pack
Step 1: Plug the cord from the power supply into the bottom of the
FS­100.
Step 2: Connect the line cord to the rectangular power supply.
Step 3: Plug the line cord into an electric outlet.
18
DC Cable
DC Power Port
FS­100 Portable DTE Recorder