Focus FS100 User Manual page 101

FS­100:
Using with a Computer
Once video clips are recorded to the FS­100 it is possible to use
those clips in most computer based DV/HD NLE systems. This
section contains the following:
Initial Setup ......................................................................... 84
Mounting the FS­100 in Windows ....................................... 85
FS­100 and FAT 32.............................................................. 87
Using Avid OMF Clips .......................................................... 88
Dismounting the FS­100 (Windows) .................................... 91
Mounting the FS­100 (Macintosh) ....................................... 92
Dismounting the FS­100 (Macintosh) .................................. 93
In the past, to get footage into an NLE system, it was necessary to
capture / digitize the footage using a video capture card. For most DV
and some P2 compatible NLE systems, FS­100 DTE functionality
eliminates the capture stage. All that is necessary is the moving of the
video files from the FS­100 to a computer.
Recording for Unsupported NLE
If a desired NLE is not supported by Focus Enhancements DTE, it is
necessary to use the AV/C control to capture the video footage for editing.
For more details refer to "Control Screen" on page 78.
FS­100 Portable DTE Recorder 83