Set Time And Date - Focus FS-C User Manual

Set Time and Date

Date and Time Must Be Set
The date and time must be set because they are used in the FS-C file
naming function.
1. Press the
Right
display appears on the screen as shown below:
2. Use the
Down
the navigation button to access the
Right
3. Use the
Up
highlighted value. Use the
highlight the Month, Day, and Year.
4. When complete, press the right-most Function button indicated
as on the screen. The new date will be indicated on the
BACK
screen.
SETUP
FS-C Portable DTE Recorder
navigation button several times until the Setup
SETUP
09 / 15 / 05
11 : 21 : 13
V 1 . 0. 0
-LCDLIGHT ON
navigation button to highlight the date and press
SET DATE
09 / 15 / 05
MM / DD / YY
and navigation buttons to change the
Down
Right
SET DATE
BACK
and navigation buttons to
Left
Quickstart
screen.
27