Quickstart
Set Time and Date
Date and Time Must Be Set
The date and time must be set because they are used in the FS-4 HD file
naming function.
1. Press the
Right
display appears on the screen as shown below:
2. Use the
Down
the
navigation button to access the Set Date screen.
Right
3. Use the
Up
highlighted value. Use the
highlight the Month, Day, and Year.
4. When complete, press the right-most Function button indicated
as
on the screen. The new date will be indicated on the
BACK
Setup Screen.
26
navigation button several times until the Setup
SETUP
09 / 15 / 05
11 : 21 : 13
V 1 . 0. 0
-LCDLIGHT OFF
navigation button to highlight the date and press
SET DATE
09
/ 15 / 05
MM / DD / YY
and
navigation buttons to change the
Down
FS-4 HD and FS-4Pro HD Portable DTE Recorders
BACK
and
navigation buttons to
Right
Left