Tc Set - Focus FS100 User Manual

FS­100 Functions
TC SET
00 : 00 : 00 : 00
HH : MM : SS : FF
The Timecode Set parameter stores a user defined timecode in the
FS­100's non­volatile memory. This value is available for use by the
FS­100 immediately after exiting
• TC FREE RUN
The FS­100 uses this value on the next recording after it is set
in .
TC SET
• TC REGEN
This is the starting value when using an empty hard disk
drive for recording.
• TC REC RUN
This is the value used to begin every recording session after a
power cycle.
54
TC SET
BACK
.
TC SET
FS­100 Portable DTE Recorder