FS100 Functions
10.
Reel Display
In
or
Record
Playback
REEL that a clip is located in or, has been marked to. If in
>
PLAY FROM
brackets for example, [REEL]. This area is blank if
has been selected.
11.
information field that displays data type.
DISP
12.
information field that displays current data.
DISP
DISP (display) Information Fields
Use the
function button to display current operation
DISP
information fields 11 and 12. The data shown depends on the
mode of operation, i.e.
Pressing the
DISP
category of information. Below is a table of the data types and
data available with
Field
Data Type /
Number
Data Description
11
COUNTER
12
Shows frame count of current video clip during record or
playback.
11
REMAINING
12
Record
as time, on a specific disk.
Playback
11
DV (NTSC or PAL) or HD (see note following table)
12
Record
by a camcorder or other device during a recording session.
Timecode mode must be set to
operate, refer to TIME CODE EXT, REC RUN, FREE RUN,
REGEN on page 53.
Playback
particular track.
11
UB NTSC
12
Displays the set user bit value in a particular clip. A user bit
value must be added for this to display, refer to UB SET on
page 55.
11
ABSOLUTE
12
Displays an absolute timecode value for the particular session:
the sum of all COUNTER timecodes on connected volumes.
Absolute is primarily used when setting the FS100 to AV/C
mode and controlling it with an external FireWire device, such
as a computer.
36
modes, this item displays the particular
mode, the REEL appears in
REEL LIST
,
DVCPROHD
DVCPRO50
button advances the display to the next
.
DISP
: counts down number of available frames remaining,
: displays time remaining of the current clip.
: displays the external timecode value being generated
EXT TC
: displays the embedded DV timecode value in a
FS100 Portable DTE Recorder
NO REEL
,
.
DVCPRO/DV
for this function to