Installing / Removing the Battery Pack
Installing a Battery
Latch Slot
Latch
Battery Pack Guides
Step 1:
Place the unit, so that the battery compartment is up.
Step 2:
Position the battery pack, as shown above, so that the latch
hook is almost in the latch slot, and touching the floor of the
battery compartment.
Step 3:
Slide the battery forward while gently pressing down.
Feel the battery slide along guides and seat itself.
Step 4:
When seated, the battery latch clicks into place.
Removing a Battery
Step 1:
Slide the battery latch to the left and hold.
Step 2:
Apply backward pressure to the battery pack at the triangle/
arrow and gently slide the pack back about 1cm or 3/8 in.
This is the reverse motion of inserting the battery.
Step 3:
Remove the battery pack.
FS100 Portable DTE Recorder
Battery
Gently press
Latch Hook
while sliding battery pack
FORWARD
Quickstart
DOWN
19