Installing / Removing the Battery Pack
Installing a Battery
Latch Slot
Latch
Battery Pack Guides
Step 1:
Step 2:
Step 3:
Step 4:
Removing a Battery
Step 1:
Step 2:
Step 3:
Battery
Latch Hook
Slide battery pack forward
Place the unit, so that the battery compartment is up.
Position the battery pack, as shown above, so that the latch
hook is almost in the latch slot, and touching the floor of the
battery compartment.
Slide the battery forward while gently pressing down.
Feel the battery slide along guides and seat itself.
When seated, the battery latch clicks into place.
Slide the battery latch to the left and hold.
Apply backward pressure to the battery pack at the triangle/
arrow and gently slide the pack back about 1cm or 3/8".
This is the reverse motion of inserting the battery.
Remove the battery pack.
Gently press down
Quickstart
17