Installing / Removing The Battery Pack; Installing A Battery; Removing A Battery - Focus FS-C User Manual

Portable dte recorder
Hide thumbs Also See for FS-C:
Table of Contents

Advertisement

Installing / Removing the Battery Pack

Installing a Battery

Latch Slot
Latch
Battery Pack Guides
1.
Place the unit, so that the battery compartment is up.
2.
Position the battery pack, as shown above, so that the latch
hook is almost in the latch slot, and touching the floor of the
battery compartment.
3.
Slide the battery forward while gently pressing down.
Feel the battery slide along guides and seat itself.
4.
When seated, the battery latch clicks into place.

Removing a Battery

1.
Slide the battery latch to the left and hold.
2.
Apply backward pressure to the battery pack at the
triangle/arrow and gently slide the pack back about 1cm or
3/8 in.
This is the reverse motion of inserting the battery.
3.
Remove the battery pack.
FS-C Portable DTE Recorder
Battery
Latch Hook
Quickstart
Gently press
DOWN
while sliding battery pack
FORWARD
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF