Quickstart
Installing / Removing the Battery Pack
Installing a Battery
Battery
Battery
Latch Hook
Latch Hook
Latch Slot
Latch Slot
Latch
Latch
Battery Pack Guides
Battery Pack Guides
1.
Place the unit, so that the battery compartment is up.
2.
Position the battery pack, as shown above, so that the latch
hook is almost in the latch slot, and touching the floor of the
battery compartment.
3.
Slide the battery forward while gently pressing down.
Feel the battery slide along guides and seat itself.
4.
When seated, the battery latch clicks into place.
Removing a Battery
1.
Slide the battery latch to the left and hold.
2.
Apply backward pressure to the battery pack at the
triangle/arrow and gently slide the pack back about 1cm.
or 3/8 inch.
This is the reverse motion of inserting the battery.
3.
Remove the battery pack.
20
Slide battery pack forward
FS-4 HD and FS-4Pro HD Portable DTE Recorders
Gently press down