Installing / Removing The Battery Pack; Installing A Battery; Removing A Battery - Focus FS-100 User Manual

Quickstart

Installing / Removing the Battery Pack

Installing a Battery

Latch Slot
Latch
Battery Pack Guides
1. Place the unit, so that the battery compartment is up.
2. Position the battery pack, as shown above, so that the
latch hook is almost in the latch slot, and touching the
floor of the battery compartment.
3. Slide the battery forward while gently pressing down.
4. Feel the battery slide along guides and seat itself.
5. When seated, the battery latch clicks into place.

Removing a Battery

1. Slide the battery latch to the left and hold.
2. Apply backward pressure to the battery pack at the
triangle/arrow and gently slide the pack back about 1cm
or 3/8 in.
3. This is the reverse motion of inserting the battery.
4. Remove the battery pack.
FS-100 Portable DTE Recorder
22
Battery
Latch Hook
Gently press
DOWN
while sliding battery pack
FORWARD