Pc Card Does Not Work, Or Is Not Recognized; Network Errors; Cannot Connect To Other Systems On Lan; Cannot Plot To Network Plotter On Lan - Intergraph InterServe 600 Series System Setup

PC Card does not work, or is not recognized

Reason
Defective PC Card is installed.
PC Card is not compatible with operating
system.
PC Card installed or removed improperly.
Windows NT PCMCIA device not enabled
after re-installing Windows NT Server.

Network Errors

Cannot connect to other systems on LAN

Reason
Ethernet cable is disconnected.
Software configuration is set incorrectly.

Cannot plot to network plotter on LAN

Reason
Ethernet cable is disconnected.
Plotter is not added to the available print
queues on your system.
Plot node does not recognize your system.
Solution
Insert another PC Card to verify the combo
drive works.
Replace with compatible PC Card.
Verify proper card installation or removal.
Enable Windows NT PCMCIA device. See
Chapter 2.
Solution
Re-connect the Ethernet cable, ensure
proper connection. If cable is properly
connected, notify your network
administrator.
Notify your network administrator.
Solution
Re-connect the Ethernet cable, ensure
proper connection.
Notify your network administrator.
Notify your network administrator.
41