Optimal; Fail-Safe - Intergraph InterServe 600 Series System Setup

Hide thumbs Also See for InterServe 600 Series:

Table of Contents

Select Yes to accept the values, or No to reject them.

Exit AMIBIOS Setup. The system will automatically restart with the values in effect.

Optimal

Selecting the Optimal icon loads the best-case values that optimize system performance. The

system is delivered using the Optimal BIOS default values. If the CMOS RAM corrupts, the

Optimal defaults are loaded during reboot.

NOTE

When using the Flash Programming Utility to reprogram the flash EPROM with a new BIOS,

this option must be selected to ensure the new BIOS values are used.

To load the Optimal BIOS values:

1. Select the Optimal icon from the AMIBIOS Setup Main Menu to load the best case BIOS

values. The following message displays:

Load Optimal Values?

Select Yes to accept the values, or No to reject them.

Exit AMIBIOS Setup. The system will automatically restart with the values in effect.

Selecting the Fail-safe icon loads settings that will configure a workable computer when

something is wrong. If you cannot boot the computer successfully, select the Fail-safe BIOS

options and try to diagnose the problem after the computer boots. These settings do not

provide optimal performance.

To load the Fail-safe BIOS values:

1. Select the Fail-safe icon from the AMIBIOS Setup Main Menu to load the basic BIOS

settings. The following message displays:

Load Fail-safe Values?

Select Yes to accept the values, or No to reject them.

Exit AMIBIOS Setup. The system will automatically restart with the values in effect.

Table of Contents

Do you have a question about the InterServe 600 Series and is the answer not in the manual?