Intergraph InterServe 600 Series System Setup page 21

If the system is connected to a network, obtain and record the following information from your
network administrator:
u
Computer name for your system:
u
Workgroup name (if the system will be
part of a workgroup):
u
Domain name (if the system will be part
of a Windows NT domain):
u
Security role for your system in the
Windows NT domain -- primary domain
controller, backup domain controller, or
domain server:
u
If your system will be acting as a backup
domain controller or domain server,
username and password of an authorized
domain administrator account:
NOTE Determine the security role for your server before beginning system configuration. You cannot
change a server to a domain controller without re-installing Windows NT Server. A domain
controller maintains security policy and performs user authentication for a domain. Servers
may be part of a domain, although they do not have to participate in a domain.
Refer to your operating system documentation for a detailed explanation of the differences
between domain controllers and servers.
If the system is connected to a network that uses the Transmission Control Protocol/Internet
Protocol (TCP/IP), obtain and record the following TCP/IP networking information from your
network administrator:
u
Internet Protocol (IP) address for your
system:
u
IP subnet mask for your system:
u
IP domain name for your network:
u
IP address for your network's default
gateway:
u
IP addresses for your network's
Domain Name System (DNS) servers,
if any:
7