Download Print this page

Intergraph WebScale User Manual page 28

Advertisement

WebScale™
User's Guide
Cluster's Full Internet Name
This parameter specifies a full Internet name for the WebScale cluster (for example,
cluster.your-company.com). This name should be the same for all hosts in the
cluster, and it is the name for the cluster as a whole. If you alias several names for the
cluster, the primary (main) name should be entered here. In any case, this name should
be resolvable to the Primary IP address through your Domain Name Server or hosts
file. This resolution is checked when verifying your license key; please see the
Licensing Information section for information on license validation.
Remote Control Password
This parameter specifies a password to be used for restricting access to the cluster from
remote, networked Windows NT systems using the webscale.exe cluster control
program. The password consists of a string of alphanumeric characters; it should be
entered here and also a second time for confirmation in the Confirm password field
immediately below.
Once a password has been accepted, subsequent webscale.exe remote control operations
must use the /PASSW command line parameter and submit the password. Clearing both
fields disables use of the remote control password.
The remote control password is not used to restrict control operations from a cluster
host.
Confirm Password
This parameter specifies the password entered immediately above in the Remote control
password field. It is used to confirm proper entry of this password. Clearing both fields
disables use of a remote control password.
Remote Control
This parameter specifies whether remote control operations are enabled. When enabled,
remote, networked Windows NT systems can control cluster operations using the
webscale.exe cluster control program. Clear this field to disable remote control.
Once remote control has been enabled, remote access can be restricted by specifying a
remote control password.
Host Parameters
The Host Parameters section of the WebScale Setup dialog appears as follows on the
screen:
24

Advertisement

loading
Need help?

Need help?

Do you have a question about the WebScale and is the answer not in the manual?