Intergraph WebScale User Manual page 25

WebScale™
In addition to the above parameters, the WebScale Setup dialog has three buttons that
apply to all parameters:
æ
Click on the OK button to save all of the entered parameters in the registry and exit
the dialog.
æ
Click on the Cancel button to exit the dialog without making any changes to the
registry that were entered in the dialog during the current session.
æ
Click on the Help button to view WebScale's on-line help information.
You can also press the Enter key to invoke the action of the highlighted button.
WebScale's parameters are read from the Windows NT registry and applied when the
driver initializes and whenever you run the command line:
webscale reload
If cluster operations were already started, they are stopped, the parameters are reloaded,
and cluster operations are restarted. This avoids the need for you to reboot the host in
order to change most of WebScale's parameter settings. For more information on
cluster control see the section Execution and Control.
Cluster Parameters
The Cluster Parameters section of the WebScale Setup dialog appears as follows on the
screen:
This section lets you enter information about your WebScale cluster. The parameters
include:
21
User's Guide