Operation; Figure 4-3: The Run Screen - Teledyne 6750 Operating Instructions Manual

Setup and Operation
f. If the calibration is acceptable, select [OK] or
[CANCEL] if not acceptable.
The analyzer is now calibrated and ready for analysis.

4.4 Operation

After proper installation and calibration, the instrument is ready to
be placed "ON-LINE" for continuous operation.
Note: For any non–standard or specific operational procedures,
please refer to the "INSTALLATION" and "AS–BUILT"
drawings in the Appendix or any Addenda that
accompanies this manual. If applicable, the Appendix or
Addenda will include details on your specific application,
which may involve valving, stream sequencing, automatic
calibration, etc.
The RUN screen will automatically appear on the screen. It will
also appear whenever the computer is rebooted or the power is turned
off and back on again. Figure 4-3 shows the RUN screen and identifies
the data fields.
Teledyne Analytical Instruments

Figure 4-3: The RUN Screen

Model 6750
40