Opt; Rst; System:boot:version; System:code:version - Fluke 1529 Chub-E4 User Manual

1529 Chub-E4 Thermometer Readout
User's Guide
8.4.8.2
8.4.8.3
8.4.8.4
8.4.8.5
112
*IDN?
HART,1529,A09001,1.11

*OPT?

Returns a list of input modules installed.
*OPT?
PRT,TC
Input module types are reported by position, top to bottom, of the two input
modules. The returned example is for a 1529 equipped with one 2-channel PRT
input module and one 2-channel Thermocouple input module.

*RST

Sets the instrument operating parameters to defined conditions.
*RST
The following parameters are set when this command is issued.
Sets the scanning sequence timer to 1 second.
Sets channel 1 ON and all others OFF.
Sets the scan mode to SCAN.
Sets the moving average to 1.
Sets the printing to all ports OFF.
Sets the units to C.
Sets the resolution to AUTO.
Stops auto logging.
Clears the statistical functions.

SYSTem:BOOT:VERSion?

Returns the boot ROM version.
SYST:BOOT:VERS?
0.50

SYSTem:CODE:VERSion?

Returns the firmware code version.
SYST:CODE:VERS?
1.11