Logging:demand:label? [Min|Max|Def]; Logging:demand:label <Num>|Min|Max|Def; Logging:demand:point; Logging:demand:print [<Num>|All [,<Port>]] - Fluke 1529 Chub-E4 User Manual

1529 Chub-E4 Thermometer Readout
User's Guide
8.4.7.16
8.4.7.17
8.4.7.18
8.4.7.19
110
Note: Every time a demand log reading is stored, the first entry in the log for
that stored reading is the data label and the date. All subsequent entries in the
demand log consist of the channel, measurement value, units, and time.

LOGging:DEMand:LABel? [MIN|MAX|DEF]

Returns the current demand log label setting.
LOG:DEM:LAB?
6
Specifying the MIN parameter returns a value of 1. Specifying the MAX pa-
rameter returns a value of 25. Specifying the DEF parameter returns a value of
1.
LOGging:DEMand:LABel <num>|MIN|MAX|DEF
Sets the current demand log label.
LOG:DEM:LAB 3
The <num> parameter specifies the demand log label number (1 to 25) to se-
lect. Specifying the MIN, MAX, or DEF parameter sets the demand log label to
the minimum, maximum, or default respectively.

LOGging:DEMand:POINt?

Returns the number of demand log entries already stored.
LOG:DEM:POIN?
21
Specifying the MAX parameter returns the total number of entries that can be
stored in the demand log.
LOGging:DEMand:PRINt [<num>|ALL [,<port>]]
Prints the demand log entries.
LOG:DEM:PRIN 23,1
DATA_23 1 22.862C 14:59:43 09-05-00
DATA_23 2 9.963 KO 14:59:44 09-05-00
DATA_23 3 23.097C 14:59:45 09-05-00
DATA_23 4 23.202C 14:59:46 09-05-00
If no parameters are specified, the ALL parameter is assumed and all demand
log entries are printed to the serial port. Specifying the <num> parameter prints
only the log entries with the specified label number to the serial port. Op-
tionally, the log entries may be printed to a specific port by specifying the
<port> parameter (see Table 10 on page 129, Port Numbers).