Logging:automatic:free; Logging:automatic:label? [Min|Max|Def]; Logging:automatic:label <Num>|Min|Max|Def; Logging:automatic:point? [Max] - Fluke 1529 Chub-E4 User Manual

The <num> parameter is the number of measurements to be stored in the auto
log during the auto log session. Specifying the MIN, MAX, or DEF parameter
sets the number of measurements to auto log to the minimum, maximum, or de-
fault respectively.
8.4.7.4

LOGging:AUTomatic:FREE?

Returns the number of auto log entries free and stored.
LOG:AUT:FREE?
8144,16
The response consists of two numbers separated by a comma. The first number
indicates the number of auto log entries still available. The second number indi-
cates the number of entries already stored.
Note: Every time an auto log session is started, the first entry in the log for that
session consists of the data label and the date. All subsequent entries in the auto
log for that session consist of the channel, measurement value, units, and time.
Therefore, an auto log session that stores 100 measurements actually uses 101
log entries.
8.4.7.5

LOGging:AUTomatic:LABel? [MIN|MAX|DEF]

Returns the current auto log label setting.
LOG:AUT:LAB?
24
Specifying the MIN parameter returns a value of 1, Specifying the MAX pa-
rameter returns a value of 25. Specifying the DEF parameter returns a value of
1.
8.4.7.6 LOGging:AUTomatic:LABel <num>|MIN|MAX|DEF
Sets the current auto log label.
LOG:AUT:LAB 4
The <num> parameter specifies the auto log label number (1 to 25) to select.
Specifying the MIN, MAX, or DEF parameter sets the auto log label to the
minimum, maximum, or default respectively.
8.4.7.7

LOGging:AUTomatic:POINt? [MAX]

Returns the number of auto log entries already stored.
LOG:AUT:POIN?
28
Specifying the MAX parameter returns the total number of entries that can be
stored in the auto log.
8 Digital Communications Interface
Commands
107