Transmitting A Large Number Of Pages (Job Build) - Sharp AR-M351N Operation Manual

SPECIAL FUNCTIONS

TRANSMITTING A LARGE NUMBER OF PAGES (JOB BUILD)

When you need to scan more pages than can be loaded in the automatic document feeder at once, use this function
to scan the pages in sets. The maximum number of pages that can be loaded in the automatic document feeder is 50.
Example: Scanning 100 A4 (8-1/2" x 11") size pages
Original
Page 1
50 pages
* Divide the original pages into sets of 50 pages or less, and
scan the sets in order beginning from the set with the first
page (first A then B in the above example).
1 In scanner mode, touch the [SPECIAL
MODES] key and then touch the
ADDRESS REVIEW
SPECIAL MODES
ENTRY FILE
TTINGS
QUICK FILE
2 Touch the [JOB BUILD] key.
SPECIAL MODES
JOB FAX OW
BUILD
MEMORY BOX
3 Touch the [OK] key.
RESEND
SPEAKER
OK
POLLING
4 Place the original in the automatic
document feeder.
Page 51
50 pages
key.
If the address book screen
appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 11).
The [JOB BUILD] key is
highlighted.
To cancel the selection,
S
touch the key once
again so that it is not
highlighted.
You will return to the
screen of step 1.
5 Follow steps 4 through 22 of "BASIC
TRANSMISSION METHOD"
14).
6 Press the [START] key.
7 Place the next set of pages in the automatic
document feeder.
8 Press the [START] key. (See step 6.)
9 Repeat steps 7 and 8 until all pages have
been scanned, and then touch the [READ-
END] key.
31
(pages 12 to
The pages are scanned.
When scanning is
finished, the [READ-
END] key appears in the
touch panel.