Condition Settings Screen Of Scanner Mode - Sharp AR-M351N Operation Manual

CONDITION SETTINGS SCREEN OF SCANNER MODE

The condition settings screen of scanner mode is displayed by pressing the [IMAGE SEND] key (refer to page 1-12
of "Operation manual (for general information and copier operation)") while the document filing mode, copy mode,
or job status screen appears in the touch panel
that appears after pressing the [IMAGE SEND] key is the condition setting screen (shown below). If you have set the
display to show the address book screen
[CONDITION SETTINGS] key in the address book to display the condition setting screen.
The key operator program "Default display settings" (refer to
the condition setting screen (shown below) or the Address book screen
key is pressed.
*1 Depending on the feature to be used, touch the [MODE SWITCH] key to select the E-MAIL/FTP mode or the
INTERNET-FAX mode.
NOTE
For information on the parts of the unit and the operation panel that are used for network scanning, refer to pages
1-9 to 1-12 of Operation manual (for general information and copier operation). For parts that are used for both
network scanning and printing, refer to chapter 4 of Operation manual (for printer).
Condition settings screen
The display is initially set (factory setting) to show the following condition setting screen as the initial screen.
The illustration below shows the screen in the E-MAIL/FTP mode.
Message display
Messages appear here to indicate the current
status of the machine.
When the machine is ready to send, an icon
appears to the left.
[ ] (Quick) key (page
When you add a one-touch key or a group key, the
machine will automatically assign a shortened
number (in this manual, this key is called the Quick
key). Use this key for a three-digit shortened
number to simplify the transmission procedure.
[MODE SWITCH] key
Touch this key to switch between the E-MAIL/FTP
mode and the INTERNET-FAX mode. If the
machine is equipped with the facsimile feature, this
key can also be used for selecting the FAX mode.
[RESEND] key
Touch this key to send to the address to which
transmission was previously made. After an
address is specified, the [NEXT ADDRESS] button
is displayed here.
. In the explanations that follow, it is assumed that the initial screen
*1
(following
READY TO SEND
.
AUTO
EXPOSURE
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO
ORIGINAL
17)
page) when the [IMAGE SEND] key is pressed, touch the
page 55) can be used to set the display to show either
(following
RESEND
E-MAIL/FTP
ADDRESS BOOK
MODE SWITCH
ADDRESS REVIEW
SPECIAL MODES
ADDRESS ENTRY FILE
SEND SETTINGS QUICK FILE
[ADDRESS BOOK] key
This displays the Address Book screen
page). Touch this key when you wish to use a one-
touch key that has a destination (or group)
programmed in it.
[ADDRESS REVIEW] key
When performing a broadcast transmission, touch
this key to check your selected destinations. Your
selected destinations will appear as a list, and the
list can be edited.
[SPECIAL MODES] key
Touch this key to set the special modes.
Erase (page
Dual page scan
Timer (page 27)
2 in 1 (page 28)
Card shot (page
Job build (page
Transaction report
Program (page
9
page) when the [IMAGE SEND]
(page 14)
(page 18)
25)
(page 26)
29)
31)
(page 32)
33)
(next