Sharp AR-M351N Operation Manual page 14

SENDING AN IMAGE
8
Touch the [SUBJECT] key.
SEND SETTINGS
SUBJECT
FILE NAME
SENDER NAME
ADD THE SEND
Proceed to step 11.
9
Select the desired subject or input the
subject.
PRE-SET
No.01 Sub:schedule coordinati
No.02 Monthly schedule
No.03 Sub:Minutes of planning
highlighting will move to the new key.
To enter the subject directly, touch the [DIRECT
ENTRY] key and enter the subject.
The selected or entered subject will be the subject
of the e-mail.
10
Touch the [OK] key.
RESEND
CANCEL
OK
1/5
DIRECT ENTRY
11
Touch the [FILE NAME] key.
SEND SETTINGS
SUBJECT Sub:schedu
FILE NAME
SENDER NAME
ADD THE SEND
12
Select the desired file name or input the file
name.
PRE-SET
No.01 Material for planning
No.02 Minutes of regular brie
No.03 Overtime management lis
The subject selection
screen appears. The list
of subjects that were
registered on the Web
page is displayed.
For Scan to FTP and
Scan to Desktop, the
subject cannot be set.
To select among the
displayed subjects,
touch the desired
subject. The selected
subject will become
highlighted. If you made
a mistake, touch the
correct key. The
The file name selection
screen appears. The list
of file names that were
registered on the Web
page is displayed.
To select among the
displayed file names,
touch the desired file
name. The selected file
name will become
highlighted. If you made
a mistake, touch the
13
correct key. The highlighting will move to the new
key.
To enter the file name directly, touch the [DIRECT
ENTRY] key and enter the file name.
The selected or entered file name will be the name
of the file attached to the e-mail.
NOTE
If you select "SPECIFIED PAGES PER FILE" for
Scan to E-mail, the specified file name will be applied
to multiple files but serial numbers (such as 001) will
be added automatically.
13
Touch the [OK] key.
RESEND
CANCEL
OK
1/5
14
Touch the [SENDER NAME] key.
SEND SETTINGS
SUBJECT Sub:schedu
FILE NAME Material
SENDER NAME
ADD THE SEN
NOTE
For Scan to FTP, Scan to Desktop, and Internet-Fax
transmission, the sender name cannot be set.
Proceed to step 17.
15
Touch the desired sender name.
SENDER NAME
test1 test4
test2 test5
test3 test6
ABCD EFGHI JKLMN
ALL SENDER
name directly, touch the [ADDRESS ENTRY] key
and then enter the e-mail address.
To enter the result of global address search, touch
the [GLOBAL ADDRESS SEARCH] key for
address search.
The selected sender will be the sender of the e-
mail.
The sender name
selection screen
appears. The list of
sender names that were
registered on the Web
page is displayed.
The selected sender
name is highlighted. If
you made a mistake,
touch the correct key.
The highlighting will
move to the new key.
To enter the sender