Key Operator Programs; Key Operator Program List; Using The Key Operator Programs - Sharp AR-M351N Operation Manual

KEY OPERATOR PROGRAMS

This section explains the key operator programs that are related to the network scanner feature of the machine. Key
operators should read this section well to ensure correct use of the programs. For key operator programs that are
related to general use of the machine, see the key operator's guide.

KEY OPERATOR PROGRAM LIST

Program name
Operation settings
Default display settings
The number of direct address/sender
keys displayed setting
Must input next address key at
broadcast setting
The number of file name/subject keys
displayed setting
Initial resolution setting
Scan complete sound setting
Default exposure settings
E-mail/FTP settings
Default sender set
Compression mode at broadcasting
Initial file format setting
Maximum size of e-mail attachments
BCC setting

USING THE KEY OPERATOR PROGRAMS

Follow the steps below to use the key operator programs.
1
Press the [CUSTOM SETTINGS] key.
2
Touch the [KEY OPERATOR PROGRAMS]
key.
DEFAULT
LIST PRINT
SETTINGS
FAX DATA
SENDER CONTROL
RECEIVE/FORWA
KEY OPERATOR PROGRAMS
I-Fax settings
Page
I-Fax default settings
Set I-Fax own name and address
55
I-Fax speaker volume settings
Auto wake up print
55
Original print on transaction report
Transaction report print select setting
55
Activity report print select setting
Body text print select setting
55
I-Fax send settings
55
I-Fax reception report on/off setting
56
I-Fax reception report request timeout
56
setting
Rotation sending setting
56
Printing page number at receiver
56
Maximum size of e-mail attachments
56
Number of resend times at reception error 59
56
I-Fax receive settings
56
Auto receive reduce setting
Reception check interval setting
Duplex reception setting
Print style setting
Set address for data forwarding
POP3 communication timeout setting
I-Fax output tray setting
Anti junk mail/domain name setting
3
Use the numeric keys to enter the five-digit
key operater code number.
KEY OPERATOR CODE
4
Touch the [IMAGE SEND SETTINGS] key.
CONTROL
DEVICE CONTROL
IMAGE SEND
SETTINGS
53
For the factory default
setting for
operator code number,
see page 2 of the key
operator's guide.
CONTROL
COPY
SETTINGS
DOC. FILING
SETTINGS
56
57
57
57
57
57
58
58
58
58
58
58
59
59
59
59
60
60
60
60
the key