Selecting The File Format - Sharp AR-M351N Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT)
For resolution other than [200x200dpi], the [HALF
TONE] key can be selected.
Internet-Fax mode
READY TO SEND.
AUTO
STANDARD
EXPOSURE
FINE
RESOLUTION
SUPER FINE
ULTRA FINE
AUTO
ORIGINAL
600 x 600dpi
Five selections are available for the resolution.
Touch the desired resolution key depending on the
original to be scanned.
For resolutions other than [STANDARD], the
[HALF TONE] key can be selected.

SELECTING THE FILE FORMAT

When you send an image to one or more recipients using Scan to E-mail or Scan to FTP, the [FILE FORMAT] key
enables you to temporarily override the individual file format settings (FILE TYPE / COMPRESSION MODE) stored
for each recipient and send the image to all of the recipients using a single file format setting.
"PDF MMR (G4)" is initially selected.
1
Touch the [FILE FORMAT] key.
EXPOSURE
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
ORIGINAL
2
Select the file type and the compression
mode.
READY TO SEND.
AUTO
EXPOSURE
FILE TYPE
300 x 300dpi
RESOLUTION
PDF TIFF
PROGRAMMED
FILE FORMAT
AUTO A4
SPECIFIED PAGES PER FILE
ORIGINAL
(a)
(a) When the "SPECIFIED PAGES PER FILE"
checkbox is not selected, all scanned pages
are combined into a single file. When the
checkbox is selected, one file is created per
page from pages specified with.
(b) Touch the or
pages from which a file is created.
OK
200 x 100
dpi
( )
200 x 200
200 x 400
HALF TONE
400 x 400
600 x 600
RESEND
OK
COMPRESSION MODE
NONE
MH G3
( )
MMR G4
( )
( 1-99 )
(b)
key to set the number of
3
Touch the [OK] key.
HALF TONE
NOTES
The initial factory resolution setting is 300x300dpi
(E-MAIL/FTP mode) or Standard (Internet-Fax
mode). If desired, you can change the initial
setting to a different setting using the key operator
program, "Initial resolution setting"
When using the automatic document feeder, the
resolution setting cannot be changed once
scanning has begun.
3
Touch the [OK] key.
OK
COMPRESSION MODE
NONE
MH
MMR ( G4 )
( 1-99 )
PER FILE
NOTES
The initial file format setting can be changed with
the key operator program "Initial file format
setting" (page 56).
Even if you change the settings in the FILE
FORMAT setting screen, you can return to the
settings stored for each recipient by selecting
"PROGRAMMED"
[PROGRAMMED] key returns the file type to the
stored file format settings.
When you perform a broadcast transmission, the
compression mode selected in the key operator
program, "Compression mode at broadcasting"
(page 56), has precedence over the others.
24
You will return to the
OK
initial screen.
(page 55).
You will return to the
initial screen.
G3
( )
once again. The