Protecting Information Programmed In The Web Page ("Passwords") - Sharp AR-M351N Operation Manual

SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE
Change custom index name screen
This screen is displayed when you click "Custom Index" in the network scanning setup screen.
Programmed destinations appear as one-touch keys in the Address book screen of the touch panel, and are
normally included in the ABC index. Two types of indexes are available: the ABC index and group indexes
(custom directories). Group indexes allow you to assign any index name to the destination for easy searching.
Six group indexes are available, and a name up to six characters long can be assigned to each.
Group index names can be programmed and edited in this screen. Enter names for indexes 1 through 6 and
then click "Submit". If you wish to change a previously programmed name, enter the new name after deleting
the previous name and save it.
For information on grouping destinations in a group index, refer to
between the ABC index and group indexes, refer to
The custom index can also be changed from the touch panel of the machine. (Refer to
Setting up internet-fax parameters
Various parameters concerning Internet-Fax transmission and reception must be set. These parameters are
used when you use the Internet-Fax feature.
Click "i-Fax" in the menu frame to display the i-Fax Setup screen.
If you use the Internet-Fax reception feature, you need to enter the settings for the POP3 server.
After setting the parameters, click "Submit" to store them.
Setting up servers
E-mail sent by Scan to E-mail, Internet-Fax transmission or Scan to FTP (Hyperlink) uses SMTP. To use any of
these transmission methods, you must enter the settings for the SMTP server.
If you use the global address search feature, you also need to enter the settings for the LDAP server.
If you entered a host name when storing a destination for Scan to FTP (Scan to FTP (hyperlink)) or Scan to
Desktop, you will need to enter the settings for the DNS or WINS server.
To set frequently used items for the SMTP server, DNS server, and LDAP server, click "Quick Setup" in the menu
frame to display the setting screen. Enter required parameters.
To set items that are not included in the quick setup screen, click "Services" or "LDAP" in the menu frame to
display the relevant setting screen. Enter required parameters.
PROTECTING INFORMATION PROGRAMMED IN THE WEB
PAGE ("Passwords")
Passwords can be set to restrict Web page access and protect settings. The administrator must change the
password from the factory default setting. Also the administrator must remember the new password. The password
is required to operate the settings on the password-protected screen.
A password can be set for the administrator and passwords can be set for each user. If you use a user password,
you will not be able to establish settings that are included only in the administrator screen.
The passwords for "user" and "admin" are both initially set to "Sharp". If you wish to change the passwords when first
establishing the settings, enter "Sharp" in "Admin Password" before you establish the settings. A password must
consist of alphanumeric characters and be no more than seven characters long. Passwords are case sensitive. After
entering a password, click "Submit" to set it. After setting the password, turn the machine power off and then back on.
When you are prompted for the password, enter "user" for accessing as a user or "admin" for accessing as an
administrator at the "User name". Then, enter the relevant password. For detailed information on setting passwords,
refer to "General" under "Help".
page
page 11.
8
6. For information on switching
page 46.)