Selecting The Exposure; Selecting The Resolution - Sharp AR-M351N Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT)

SELECTING THE EXPOSURE

You can adjust the exposure manually to match the type of original. After loading the original in scanner mode, follow
the steps below. The default setting for the exposure is "AUTO".
Change the exposure
1
Touch the [EXPOSURE] key.
AUTO
EXPOSURE
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
2
Select [AUTO] or [MANUAL].
AUTO MANUAL
1 3 5
AUTO
MANUAL
1 3 5

SELECTING THE RESOLUTION

The resolution for scanning an original can be selected. Load the original in scanner mode and then follow the steps
below. The default setting for the resolution is "300x300dpi" (E-MAIL/FTP mode) or "STANDARD" (Internet-Fax
mode).
Change the resolution
1
Touch the [RESOLUTION] key.
AUTO
EXPOSURE
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
If you selected [AUTO],
O
the exposure will be
adjusted automatically.
If you selected
O
[MANUAL], touch the
or key to adjust
the exposure. (For
darker contrast, touch
the key. For lighter
contrast, touch the
key.)
3
Touch the [OK] key.
AUTO
MANUAL
1 3 5
NOTES
The default value of exposure can be set using the
key operator program, "Default exposure settings"
(page 56).
When using the automatic document feeder, the
exposure setting cannot be changed once
scanning has begun.
2
Touch the desired resolution key.
E-MAIL/FTP mode
READY TO SEND.
AUTO
EXPOSURE
RESOLUTION
PROGRAMMED
FILE FORMAT
AUTO
ORIGINAL
Four selections are available for the resolution.
Touch the desired resolution key depending on the
original to be scanned.
The selected key is highlighted.
23
You will return to the
OK
initial screen.
OK
200 x 200dpi
300 x 300dpi
400 x 400dpi HALF TONE
600 x 600dpi