Using Other Team Functions; Turning Group Call On And Off - Siemens HiPath 3000 Opearting Instructions

Using Other Team Functions

Step by Step
US: Leave group?
UK: Leave hunt group?
US: Join group?
UK: Join hunt group?
GA>
or
84
Using Other Team Functions

Turning Group Call On and Off

If this function has been configured (contact the service
personnel), you belong to one or more groups of users
who can each be reached under a hunt group or group
call number.
Incoming calls are signaled on all group member tele-
phones in the order in which they are received ( hunt
group) or simultaneously (= group call) until one mem-
ber of the group accepts the call.
You can also belong to a team (including executive/sec-
retary ones) in which station numbers are programmed
on trunk keys Æ page 77.
Each member of the group remains available under his
or her own station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding an executive/secretary team).
If the LED on a programmed "US:Join/leave group
UK:Hunt group join/leave" key Æ page 54 is illuminated,
this means that the audible tone was activated for at
least one group.
You belong to a hunt group or a group call:
Select and confirm.
or
or
FA>
Enter the code for "leave" or "join".
or
Press the Hunt group join/leave key.
or
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) Æ page 89!