Using Other Team Functions; Turning Group Call On And Off - Siemens HiPath 3000 Operating Instructions Manual

Using Other Team Functions

Step by Step
US: Leave group?
UK: Leave hunt group?
US: Join group?
UK: Join hunt group?
GA>
or
88
Using Other Team Functions

Turning Group Call On and Off

If this function has been configured (contact your ser-
vice personnel), you belong to one or more groups of
users who can each be reached under a hunt group or
group call number.
Incoming calls are signaled on all group member tele-
phones in the order in which they are received ( hunt
group) or simultaneously (= group call) until one mem-
ber of the group accepts the call.
You can also belong to a team (including executive/sec-
retary ones) in which station numbers are programmed
on trunk keys Æ page 81.
Each member of the group remains available under his
or her own station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding an executive/secretary team).
If the LED on a programmed "US:Join/leave group
UK:Hunt group join/leave" key Æ page 57 is illuminated,
this means that the audible tone was activated for at
least one group.
You belong to a hunt group or a group call:
Select and confirm.
or
or
FA>
Enter the code for "leave" or "join".
or
Press the Hunt group join/leave key.
or
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) Æ page 93!