Korg microSAMPLER Owner's Manual page 35

4.
Use the [PARAMETER/FX CONTROL 1] knob to select the "DEL
PTRN" page.
5.
Use the [VALUE/FX CONTROL 2] knob to select the pattern that you
want to delete.
6.
Press the [ENTER/SHIFT] button.
7.
When the display asks "SURE?," press the [ENTER/SHIFT] button once
again to comfirm. If you decide to cancel, press the [EXIT] button to
return to step 5.
The pattern will be deleted, and the screen will indicate "COMPLETE."
SWAP.PTRN (Swap Pattern) ....................................................[DEST 01...16]
This exchanges the selected pattern with the pattern you specify.
1.
Press the [EDIT] button to make it blink.
If the [EDIT] button is not blinking, press it again until it blinks.
2.
Use the [PARAMETER/FX CONTROL 1] knob to select the "PTRN
SEQ" page.
3.
Press the [EDIT] button to make it light-up.
4.
Use the [PARAMETER/FX CONTROL 1] knob to select the
"SWAP.PTRN" page.
5.
Use the [VALUE/FX CONTROL 2] knob to select the pattern that you
want to swap.
6.
Press the [ENTER/SHIFT] button.
7.
When the display asks "SURE?," press the [ENTER/SHIFT] button once
again to comfirm. If you decide to cancel, press the [EXIT] button to
return to step 5.
The patterns will be exchanged, and the screen will indicate "COM-
PLETE."
LOAD.PTRN (Load Pattern) ..............................[FROM.BNK.A...H, R (ROM)]
LOAD.PTRN (Load Pattern) .................................. [FROM.PT.AL, PT.01...16]
This loads a pattern from the specified bank into the currently selected pat-
tern.
1.
Press the [EDIT] button to make it blink.
If the [EDIT] button is not blinking, press it several times until it blinks.
2.
Use the [PARAMETER/FX CONTROL 1] knob to select the "PTRN
SEQ" page.
3.
Press the [EDIT] button to make it light-up.
4.
Use the [PARAMETER/FX CONTROL 1] knob to select the
"LOAD.PTRN" page.
5.
Use the [VALUE/FX CONTROL 2] knob to select the bank containing
the pattern you want to load.
6.
Press the [ENTER/SHIFT] button.
If there are no patterns in the bank, the display will indicate "ERROR
NO.SAMPLE." Press the [EXIT] button to return to step 5, and select a dif-
ferent bank.
7.
Use the [VALUE/FX CONTROL 2] knob to select the pattern you want
to load.
8.
Press the [ENTER/SHIFT] button.
9.
When the display asks "SURE?," press the [ENTER/SHIFT] button once
again to comfirm. If you decide to cancel, press the [EXIT] button to
return to step 7.
The pattern will be loaded.
Do not use the microSAMPLER's knobs, buttons, or keyboard while this
operation is in progress. Never turn off the power during this time.
Reference guide
35