Global Parameters; Procedure; Function And Parameter List - Korg microSAMPLER Owner's Manual

Sampling keyboard
Table of Contents

Advertisement

These parameters let you adjust settings such as metronome, MIDI channel,
and memory protect.
1.
Press the [EDIT] button to make it blink.
If the [EDIT] button is not blinking, press it again until it blinks.
2.
Use the [PARAMETER/FX CONTROL 1] knob to select the "GLOBAL"
page.
3.
Press the [EDIT] button to make it light.
Use the [PARAMETER/CONTROL 1] knob to select the desired global
parameters, and make settings that apply to the entire microSAMPLER.
The
indicator will appear when you select the "GLOBAL" page.

Function and parameter list

METRONOME (Metronome) ..............["OFF," REC 0, REC 1, REC 2, REC ON]
This specifies how the metronome will function. It's convenient to use the
metronome when you record into the pattern sequencer.
"OFF"
The metronome will not be heard.
Pattern sequencer recording will start without a count.
REC 0, 1, 2
Specify the number of measures before recording will begin.
When you press the [REC] button from the pattern sequencer record-
standby mode, there will be a count for the specified number of mea-
sures at the current tempo, and then pattern sequencer recording will
begin.
The metronome will be heard during recording.
With the REC 0 setting, pattern sequencer recording will start without a
count.
38

Global parameters

Procedure

ON
The metronome will be heard during pattern sequencer playback or
recording.
Pattern sequencer recording will start without a count.
LCD.LIGHT (LCD backlight mode) .................................. ["OFF," AUTO, ON]
This specifies the display backlight mode.
"OFF"
The backlight will be off.
AUTO
The backlight will illuminate when you operate a knob or press a button.
After a time, the backlight will turn off.
ON
The backlight will remain on constantly.
PROTECT (Memory protect) .......................................................... [OFF, ON]
The memory protect setting lets you disable writing into memory, in order to
keep data from being accidentally rewritten. If you want to save the data
you've edited, you'll need to turn memory protect off.
OFF
Samples and pattern sequences can be saved.
ON
Samples and pattern sequences cannot be saved.
AUDIO IN (Audio in mode) ............................................ [L/MONO, STEREO]
This switches the audio input mode.
The input from the AUDIO IN [R] jack is enabled only if you select STEREO.
If the rear panel AUDIO IN [
/LINE] switch is at "
function as if this parameter were set to "L/MONO" even if you've selected
STEREO (☞p.24 "MONO/ST").
If you set this to "L/MONO," the input from the AUDIO IN [L/MONO] jack and
AUDIO IN [R] jack will be mixed and sampled in monaural if the rear panel
AUDIO IN [
/LINE] switch is at "LINE" (☞p.24 "MONO/ST").
" , the microSAMPLER will

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents