Korg microSAMPLER Owner's Manual page 56

Sampling keyboard
Table of Contents

Advertisement

microSAMPLER
12. CHORUS (Stereo Chorus)
This effect adds depth and warmth to the sound by modulating the delay
time of the input signal. You can control the spaciousness by skewing the
LFO for the left and right signals.
Wet: Stereo In - Stereo Out
Left
Trim
Trim
Right
LFO
DRY/WET
.............................................................. [DRY, 99:1...1:99, WET]
Adjusts the balance between the effect sound and the direct sound.
MOD.DEPTH (Modulation Depth)
Adjusts the depth of modulation produced by the LFO.
LFO FREQ (LFO Frequency)
Specifies LFO frequency. Higher values will make the LFO faster.
LFO SPRD (LFO Spread) ..........................................................[–180...+180º]
Specifies the LFO phase difference between the left and right channels.
PREDLY L, PREDLY R (PreDelayL, PreDelayR) ........................[0.0...50.0 ms]
Specify the delay times for the left and right channels.
TRIM ...................................................................................................[0...127]
Adjusts the input level to the effect.
HI.EQ.GAIN (High EQ Gain) ..............................................[–15.0...+15.0 dB]
Adjusts the gain of the high-frequency equalizer.
56
Dry / Wet
HEQ
Chorus
HEQ
Chorus
Dry / Wet
LFO Spread
...............................................[0...127]
.........................................[0.01...100.00 Hz]
13. FLANGER (Stereo Flanger)
This effect gives the sound intense modulation with a sense of changing
pitch. It is particularly effective when applied to sounds that contain a rich
overtone structure. It's a stereo effect that allows you to control the spacious-
ness by skewing the LFO for the left and right signals.
Wet: Stereo In - Stereo Out
Left
Right
LFO Shape
LFO
DRY/WET
.............................................................. [DRY, 99:1...1:99, WET]
Adjusts the balance between the effect sound and the direct sound.
DELAY
................................................................................. [0.0...30.0 ms]
Specifies the delay time in msec units.
MOD.DEPTH (Modulation Depth)
Adjusts the depth of modulation produced by the LFO.
FEEDBACK
.................................................................................... [0...127]
Adjusts the amount of feedback for the left and right channels.
PHASE .....................................................................................................[+, –]
Switches the phase of the output and feedback.
LFO SYNC (LFO Tempo Sync) ......................................................... [OFF, ON]
☞p.48 "LFO SYNC (LFO Tempo Sync)"
LFO FREQ (LFO Frequency)
.........................................[0.01...100.00 Hz]
☞p.48 "LFO FREQ (LFO Frequency)"
SYNC.NOTE (LFO Sync Note)
..................................................[8/1...1/64]
☞p.48 "SYNC.NOTE (LFO Sync Note)"
LFO WAVE (LFO Waveform) ............[SAW, SQUARE, TRIANGLE, SINE, S&H]
☞p.48 "LFO WAVE (LFO Waveform)"
Dry / Wet
Flanger
Feedback
High Damp
Flanger
Dry / Wet
LFO Spread
.............................................. [0...127]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents