You can access Shift functions by holding down the [ENTER/SHIFT] button
and pressing one of the following buttons or a speciﬁc key on the keyboard.
[LOOP HOLD] button
Holds all keys whose PLAY.TYPE is set to "LOOP ON." (☞p.27 "1. Loop
Mutes the samples of all keys. When you play back the pattern
sequencer, none of the samples assigned to the keys will sound.
(☞p.34 "Using the mute function")
Plays the selected pattern sequence from the beginning of the pat-
tern. (☞p.21 "3. Selecting and playing patterns")
Executes Undo/Redo for the pattern recording operation. (☞p.21
"2. Undoing or redoing pattern recording")
Deletes the keyboard performance data recorded in the pattern.
(☞p.34 "6. Editing a pattern")
Executes an All Sound Off command. All sounds that are playing
[FX SW] button
If the selected sample is off, the [FX SW] of all keys will turn on. If the
currently selected sample is on, the [FX SW] of all keys will turn off.
You can use a shortcut to an edit page by holding down the [EDIT] button
and pressing a key that's labeled with the name of the edit page.
BANK CHG (Bank Change)
BANK.NAME (Bank Name)
AUDIO IN FX SW
TIME (Sampling Time)
LEVEL (Sampling Level)
FX POS (Fx Position)
SMPL.NAME (Sample Name)
ST POINT (Start Point)