Installing The Thread Stand; Attaching The Button Tray - JUKI AMB-289/IP-420 Instruction Manual

(12) Installing the thread stand

2
1

(13) Attaching the button tray

4
1) Assemble the thread stand, and set it in the
2) Tighten locknut 1 to fix the thread stand.
3) When ceiling wiring is possible, pass the
1) Fix base 1 on the table with wood screw 2 .
2) Insert button tray 4 in the hole of base 1
1
2
3
Ⅰ–13
hole in the top right corner of the machine
table.
power cable through spool rest rod 2 .
and fix it with setscrew 3 after adjusting
the position to that where the button can be
taken with ease.
It is possible to change the loader set
position as well. It is recommended
to perform positioning them together.
(Memory switch )