Replacing The Fuse - JUKI AMB-289/IP-420 Instruction Manual

(2) Replacing the fuse

DANGER :
1. To avoid electrical shock hazards, turn OFF the power and open the control box cover after about
five minutes have passed.
2. Open the control box cover after turning OFF the power without fail. Then, replace with a new
fuse with the specified capacity.
The machine uses the following three fuses :
1 For pulse motor power supply protection
5A (time-lag fuse)
1
2 For solenoid and pulse motor power
supply protection
2
3.15A (time-lag fuse)
3 For control power supply protection
3
2A (fast-blow type fuse)
Ⅰ–25