Managing The Cord; Installing The Eye Protection Cover And The Finger Guard - JUKI AMB-289/IP-420 Instruction Manual

(10) Managing the cord

1) Slowly tilting the sewing machine, check that the cords are not forcibly pulled.
2) Fix the cords with cord setting plate 1 as shown in the figure.
When you tilt the sewing machine, make sure that the sewing machine head
support bar 2 is placed on the table.

(11) Installing the eye protection cover and the finger guard

DANGER :
Be sure to attach this cover to protect the eyes from the disperse of needle breakage.
Be sure to install eye protection cover 1 and
finger guard 2 , and use the sewing machine.
1
2
Ⅰ–12
2
1