Greasing Parts - JUKI AMB-289/IP-420 Instruction Manual

(3) Greasing parts

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
Periodically perform grease-up every 6 months as a standard, or perform grease-up when
(grease-up time) is displayed on the operation panel.
There are three kinds of the exclusive greases supplied as accessories.
○ Grease in grease tube (green, Part No. 13525506)
. → Apply grease to rack, gear and cam section.
Greasing section
of rack and gear
Greasing section of
rack on the front side
Greasing section of
rack on the rear side
1) Remove the rear cover, and apply grease to
rack and gear section of Y top feed.
2) Remove the rear cover and the side cover,
and apply grease to rack and gear section
of Y bottom feed.
• Move the bottom unit to the extreme front,
and apply grease to the front section of the
rack section.
• Move the bottom unit to the extreme rear,
and apply grease to the rear section of the
rack section.
Ⅰ–26