Adjusting The Needle And The Needle Guide; Adjusting The Position Of The Needle And The Throat Plate; Adjusting The Clearance Between The Needle And The Needle Guide - JUKI AMB-289/IP-420 Instruction Manual

(3) Adjusting the needle and the needle guide

1) Adjusting the position of the needle and the throat plate

1
Center

2) Adjusting the clearance between the needle and the needle guide

1
2
0 to 0.1mm
Loosen screws 1 and adjust the throat plate so
that the needle enters the center of the needle
hole.
Loosen screw 1 and adjust so that the clearance
between needle guide 2 and the needle is 0 to 0.1
mm at the lowest position of the needle bar.
Ⅰ–20