Installation; Set-Up Of The Table - JUKI AMB-289/IP-420 Instruction Manual

2. INSTALLATION

DANGER :
To prevent possible accidents caused by the fall of the sewing machine, perform the work by two
persons or more when the machine is moved.

(1) Set-up of the table

8
!3
9
1) Fix control box 2 , power switch 3 , auxiliary table !3 and start switch 4 to table 1 .
Note) Install auxiliary table.!3 . before installing start switch 4 .
2) Fix the cables of power switch 3 and start switch 4 with staples.
3) Pass arm stay fixing screws !1 (3 pcs.) through arm stay 5 , instal on the table, and fix them with
nuts !2 .
4) Drive pins 6 to the table, and insert rubber cushions 7 .
5) Fix head support bar 8 on table 1 .
6) Connect the pedal (left-hand side) and control box pedal sensor !0 with connecting rod 9 .
supplied as accessories.
Adjust the positions of the pedals so that connecting rods 9 and control box 2 do not come in
contact with each other.
5
!2
4
!1
7
6
3
9
Ⅰ–5
1
2
!0